SELECTION BY APPLICATION / Solution and Powders / 3D Cell culture IN gels
AteloCell®3D Cell culture IN gels
In contrast to cell-derived soluble basement membrane preparations, collagen solutions are free from bioactive compounds, nucleic acids, matrix metalloprotease (MMP), etc., allowing experimental results to be evaluated more clearly. Atelocollagen/Native collagen acidic solutions are high purity collagen solutions prepared from bovine dermis and are suitable for collagen gel fabrication. Two types of atelocollagen/native collagen products are available: I-PC (atelocollagen) and I-AC (native collagen). Atelocollagen is a derivative of collagen produced by protease treatment to remove the telopeptides at both ends of the collagen molecule.
Product name (click for order info) |
Cat no (click for datasheet) |
Size |
Notes |
|
KOU-CLP-01
|
500 mg/bottle |
Highly purified atelocollagen powder for preparing atelocollagen solutions suitable for gel formation. |
Collagen Type |
Source |
Collagenase harvestable |
Product form |
Specs |
Storage |
Atelo, type 1 |
Bovine dermis |
Yes |
Powder |
2 mg/mL |
-20°C |
Product name (click for order info) |
Cat no (click for datasheet) |
Size |
Notes |
|
KOU-MEN-02
|
20ml/bottle |
Atelocollagen neutral solutions are high purity collagen solutions prepared from bovine dermis and form a gel under physiological conditions. These products are pre-mixed with culture medium and ready to use for cell culture. |
Collagen Type |
Source |
Collagenase harvestable |
Product form |
Specs |
Storage |
Atelo, type 1 |
Bovine dermis |
Yes |
Sterilized, neutral solution (Eagle’s MEM pH 7.4) |
2 mg/mL |
-20°C |
Product name (click for order info) |
Cat no (click for datasheet) |
Size |
Notes |
|
KOU-DME-02
|
20ml/bottle |
Atelocollagen neutral solutions are high purity collagen solutions prepared from bovine dermis and form a gel under physiological conditions. These products are pre-mixed with culture medium and ready to use for cell culture. |
Collagen Type |
Source |
Collagenase harvestable |
Product form |
Specs |
Storage |
Atelo, type 1 |
Bovine dermis |
Yes |
Sterilized, neutral solution (DMEM Low Glucose pH 7.4) |
2 mg/mL |
-20°C |
Product name (click for order info) |
Cat no (click for datasheet) |
Size |
Notes |
|
KOU-DME-02H
|
20ml/bottle |
Atelocollagen neutral solutions are high purity collagen solutions prepared from bovine dermis and form a gel under physiological conditions. These products are pre-mixed with culture medium and ready to use for cell culture. |
Collagen Type |
Source |
Collagenase harvestable |
Product form |
Specs |
Storage |
Atelo, type 1 |
Bovine dermis |
Yes |
Sterilized, neutral solution (DMEM High Glucose pH 7.4) |
2 mg/mL |
-20°C |
Product name (click for order info) |
Cat no (click for datasheet) |
Size |
Notes |
|
KOU-RPM-02
|
20ml/bottle |
Atelocollagen neutral solutions are high purity collagen solutions prepared from bovine dermis and form a gel under physiological conditions. These products are pre-mixed with culture medium and ready to use for cell culture. |
Collagen Type |
Source |
Collagenase harvestable |
Product form |
Specs |
Storage |
Atelo, type 1 |
Bovine dermis |
Yes |
Sterilized, neutral solution (RPMI 1640 pH 7.4) |
|
-20°C |
Product name (click for order info) |
Cat no (click for datasheet) |
Size |
Notes |
|
KOU-IAC-30 |
50ml/bottle |
I-AC is an acid-soluble collagen which retains telopeptides. Its viscosity, transparency and rigidity are higher than those of I-PC.
I-AC forms a gel under physiological conditions in approximately 15 min, which permits cells to remain dispersed inside the gel rather than settling to the bottom. |
Collagen Type |
Source |
Collagenase harvestable |
Product form |
Specs |
Storage |
Native, type 1 |
Bovine dermis |
Yes |
Sterilized acidic solution (pH 3.0) |
3 mg/mL |
2-10°C |
Product name (click for order info) |
Cat no (click for datasheet) |
Size |
Notes |
|
KOU-IAC-50 |
50ml/bottle |
I-AC is an acid-soluble collagen which retains telopeptides. Its viscosity, transparency and rigidity are higher than those of I-PC.
I-AC forms a gel under physiological conditions in approximately 15 min, which permits cells to remain dispersed inside the gel rather than settling to the bottom. |
Collagen Type |
Source |
Collagenase harvestable |
Product form |
Specs |
Storage |
Native, type 1 |
Bovine dermis |
Yes |
Sterilized acidic solution (pH 3.0) |
5 mg/mL |
2-10°C |
Product name (click for order info) |
Cat no (click for datasheet) |
Size |
Notes |
|
KOU-IPC-30 |
50ml/bottle |
I-PC is a protease-solubilised atelocollagen with reduced immunogenicity while maintaining collagen functions. I-PC is suitable for collagen gel formation.
I-PC takes approximately 60 min to form a gel and has low viscocity, which leads to cell settling during gel formation unless the atelocollagen concentration is kept over 0.35% |
Collagen Type |
Source |
Collagenase harvestable |
Product form |
Specs |
Storage |
Atelo, type 1 |
Bovine dermis |
Yes |
Sterilized acidic solution (pH 3.0) |
3 mg/mL |
2-10°C |
Product name (click for order info) |
Cat no (click for datasheet) |
Size |
Notes |
|
KOU-IPC-50 |
50ml/bottle |
I-PC is a protease-solubilised atelocollagen with reduced immunogenicity while maintaining collagen functions. I-PC is suitable for collagen gel formation.
I-PC takes approximately 60 min to form a gel and has low viscocity, which leads to cell settling during gel formation unless the atelocollagen concentration is kept over 0.35% |
Collagen Type |
Source |
Collagenase harvestable |
Product form |
Specs |
Storage |
Atelo, type 1 |
Bovine dermis |
Yes |
Sterilized acidic solution (pH 3.0) |
5 mg/mL |
2-10°C |